For each equipment, it is very important to be able to successfully complete the work production, and in the production of paste filling machine, the most important step is to cut and fill, if the equipment is not out of the material when working, the whole production can not be carried out at all. Delaying the production schedule will cause a lot of losses to the enterprise, so what should be done when the paste filling machine is not discharged? Our technology has sorted out a few common questions, so let's learn them quickly.
Troubleshooting:
- First of all, check whether there are products in the hopper, please add, note: the product in the hopper can not be less than one-tenth, less than one-tenth continue to fill, it will affect the accuracy of filling.
- Check whether there is any blockage in the filling and filling liner, which is divided into two types: the machine is filled in the last time, and it is not cleaned for a long time, which causes the product in the liner to solidify and block the liner, and second, there are sundries in the product, which is stuck on the piston of the liner, resulting in a bad sealing effect, and the above two situations occur, please clean up in time to avoid damaging the piston.
- The above two situations can not solve the problem, which is that the sealing ring on the piston of the inner tank has been damaged, please replace, and the part that sends the product to the filling nozzle under the hopper is called the inner tank.
Tips:
- Before use, clean the hopper and add the product (that is, the paste liquid you need to fill)
- After adding the product, press down the manual lever by hand until the product can come out of the filling nozzle normally.
- After the product can come out normally, after starting to adjust the filling volume, there is a plastic nut under the hopper, twisting the filling volume clockwise to become smaller, on the contrary, to become larger, debugging to the filling volume you need, that is, you can start working.
